Tina Solis. Furniture. July 26th , 2017.
Finding suitable replacement materials for inlay and boulle antiques is an even greater problem. They tend to use more complex and varied materials. Antique and second-hand shops often have boxes containing suitable oddments and it is worth searching through them to find matching pieces. As a last resort, missing pieces of inlay can be built up with synthetic resins or wax, coloured to match. If boulle has lifted seriously or is bent, leave the repair to an expert restorer; but if the lifting is only slight, carefully remove the section and scrape clean all the dirt. Stick with an epoxy resin adhesive and weight it down until the glue has dried.
Furniture Veneer, Inlay, Marquetry and Boulle: Their artistry fell into four main categories: veneers, strips of mahogany or walnut, waxed and polished to enrich their grain and colour; marquetry, patterns and pictorial designs built up from a variety of different woods; inlay, which achieved a similar effect using pieces of tortoiseshell, mother of pearl, ivory and ebony; and boulle, named after a French family of cabinet makers in the 17th and 18th centuries whose furniture was decorated with designs in brass, picked out in black pigment and filled in with inlay. The skills of these craftsmen linger on in many small individual firms. Many of these antique pieces fetch an unbelievably high price at auctions around the globe, especially if they are from sought after craftsmen from early Victorian periods.
Even still, it is clear that there are a number of different materials for outdoor furniture at home-owners’ disposal, beyond synthetic rattan; and while none of them looks set to topple the hegemony rattan garden furniture has over the outdoor market, they nonetheless constitute valid alternatives for home-owners looking for something different.
Would this be wisdom? Shouldn't my but try out every occasional chair? Shouldn't I have a go with laying out three works of assignments on a dining room table? Well, just similar to buying clothes, do investigation first - and then hit since!
The same hot iron and gluing method is used in repairing marquetry. Lay a piece of paper over the missing section and rub with a soft pencil to get an outline of the area. Cut the paper to the pattern and stick it to the replacement piece of wood. Cut the wood slightly larger than the pattern and rub down with glass-paper until the exact fit can be obtained. Stick it into place with cold wood glue. On many antique furniture pieces the marquetry tends to lift through age and using the warm iron technique will heat the glue and the raised piece can be gently pressed down back into position. If dust has been trapped under the lifted section, it should be removed, cleaned and re-stuck into position.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Oxyhost claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.