Nona Oneill. Furniture. March 28th , 2017.
The oversize pieces work well in large open settings. You can easily imagine over-sized sofas and chairs in a hotel lobby, but they can just as easily be used in a very large living room. Choosing pieces that work well in your environment is really a matter of taste. Picking items that fit nicely into your home or business setting may take a bit of browsing, but finding items that make you feel good, and that look good in your space, is really what it's all about.
A simple way to improve antique pieces of furniture, such as a chest of drawers, is to fit new handles. The Victorians had a habit of replacing metal handles with round wooden knobs, often leaving the marks of the former back-plates showing. Sets of old handles can be picked up cheaply from antique and second-hand shops but make sure that the back-plates are large enough to cover any existing indentations.
Finding suitable replacement materials for inlay and boulle antiques is an even greater problem. They tend to use more complex and varied materials. Antique and second-hand shops often have boxes containing suitable oddments and it is worth searching through them to find matching pieces. As a last resort, missing pieces of inlay can be built up with synthetic resins or wax, coloured to match. If boulle has lifted seriously or is bent, leave the repair to an expert restorer; but if the lifting is only slight, carefully remove the section and scrape clean all the dirt. Stick with an epoxy resin adhesive and weight it down until the glue has dried.
Assured Quality. Quality assurance is a given in custom furniture as you will be aware about the materials and finish used and its perfection can be obtained, as you are in the process but with store bought furniture you buy a readymade furniture but are not into the whole process.
The same hot iron and gluing method is used in repairing marquetry. Lay a piece of paper over the missing section and rub with a soft pencil to get an outline of the area. Cut the paper to the pattern and stick it to the replacement piece of wood. Cut the wood slightly larger than the pattern and rub down with glass-paper until the exact fit can be obtained. Stick it into place with cold wood glue. On many antique furniture pieces the marquetry tends to lift through age and using the warm iron technique will heat the glue and the raised piece can be gently pressed down back into position. If dust has been trapped under the lifted section, it should be removed, cleaned and re-stuck into position.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Oxyhost claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.