Tina Solis. Furniture. July 23rd , 2017.
A simple way to improve antique pieces of furniture, such as a chest of drawers, is to fit new handles. The Victorians had a habit of replacing metal handles with round wooden knobs, often leaving the marks of the former back-plates showing. Sets of old handles can be picked up cheaply from antique and second-hand shops but make sure that the back-plates are large enough to cover any existing indentations.
Uniqueness. Being mass produced store bought furniture will hardly have any difference from one piece to another as it will not be a one of a kind. Owning a customised furniture you will be the only person who has it and will reflect your particular taste on it.
Natural Rattan Furniture: Even more than with synthetic rattan, the question of whether or not rattan furniture is eco-friendly seems to arise about items made from the actual material extracted from palm trees. Any natural material will always bring about doubts as to whether or not using it may be harming the environment, and in the case of rattan, this is no different.
How To Store Goods In The Units? Once all the things have been carefully packed, the next step is furniture storage in the units. The items should be organized in a manner that the biggest items are placed in the locker first and the smaller items are filled in the extra spaces. Refrigerators, ovens, washers, and dryers can be placed upright to save space. Leave the do0ors open to prevent an unpleasant smell from developing.
Wood veneers can be difficult to match. It is possible to buy new veneer strips, but they are generally thinner than the old hand-sawn veneers and do not always match in colour. It often pays to go to an auction to look for a broken oddment of furniture that has suitable veneers. To remove a veneer from its backing, first clean off any old polish with white spirit and carefully clean the varnish or wax. Place a damp cloth over the cleaned strip and press with a fairly hot iron. Keep the cloth damp. This melts the Scotch glue holding down the veneer, which can then be peeled off. The same technique is used to raise small areas on the antique piece, but use a soldering iron instead of an iron. Wipe all traces of glue while it is still warm. Dampen the veneer and flatten it between two pieces of wood for about 24 hours before use. Do not let it dry completely, for veneers must be re-laid while still damp and pliable. The replacement veneer should be slightly thicker than the existing one, to allow for sanding. Stick the new strip down with Scotch glue and apply a weight or clamp until the glue has completely set. Wax and polish to match the existing finish.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Oxyhost claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.