Furniture. Saturday , March 10th , 2018 - 19:26:41 PM
The same hot iron and gluing method is used in repairing marquetry. Lay a piece of paper over the missing section and rub with a soft pencil to get an outline of the area. Cut the paper to the pattern and stick it to the replacement piece of wood. Cut the wood slightly larger than the pattern and rub down with glass-paper until the exact fit can be obtained. Stick it into place with cold wood glue. On many antique furniture pieces the marquetry tends to lift through age and using the warm iron technique will heat the glue and the raised piece can be gently pressed down back into position. If dust has been trapped under the lifted section, it should be removed, cleaned and re-stuck into position.
Cover the sofas with a cotton sheet and place them on a plastic sheet. Light chairs can be stacked on top of the other. But secure them carefully so that they don't trip and damage other items. You can use mattresses as buffers between each item.
A storage unit which has wide doors and safe walls between lockers should be chosen. Also, make sure that there are no signs of water damage in any part of the building. Furniture should be kept dry because moisture is the main cause of damage to stored furniture. You should have many thick plastic sheets handy. These sheets should be laid on the floors of self storage units to keep moisture and humidity at bay. Moisture can cause mold growth which is harmful for furniture. Furniture storage can also be done on top of wooden pallets which let the items breathe and save them from moisture.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Oxyhost claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.